To Operate A Bathroom Controller; Turn Off The Kitchen Controller; Turn On The Bathroom Controller; Select The Temperature Setting - Rheem 27 Owner's Manual And Installation Instructions

To operate a Bathroom controller:

1.

Turn off the Kitchen controller

If a temperature setting is displayed and the priority light is not glowing, it is advised to turn off the
Kitchen controller.
Refer to the notes on the Bathroom controllers

Turn on the Bathroom controller

2.
Press the on / off button.
The on / off operating light and the priority light will both
glow.
The temperature setting of 40°C will be displayed.

Select the temperature setting

3.
Press the up ( ) button or down ( ) button.
Refer to "Temperature Adjustment – Standard Controller"
on page 13.
The selected temperature setting will be displayed on all
controllers.
Open the hot tap
4.
The in use light will glow on all controllers.
Close the hot tap
5.
The in use light will go out on all controllers, if no other
hot tap is open.
It is advised not to turn off the Bathroom controller(s).
Refer to the warning in the notes on page 16.
17
TEMPERATURE CONTROL – STANDARD
on page 16.
in us e
h o t w a t e r
t e m p e r a t u r e
b e f o r e u s e
i n u s e
i n us e
in us e
pri ori ty
40
°C
c h e c k
on
o ff
pri ori ty
42
°C
pri o ri ty
42
°C
pri ori ty
42
°C