Verifying The Version Numbers; Performing A Factory Reset - Roland BK-5 Service Notes

Jan. 2012

Verifying the Version Numbers

1. Press the [MENU] button
2. Select GLOBAL and press the [ENTER] button
3. Select UTILITY and press the [ENTER] button
4. Scroll up to the end of the list to reach the Version Info Label.
The following screen will show the Version number.

Performing a Factory Reset

The following function allows you to recall the BK-5 original factory settings. This has no effect on the data
stored on a USB memory.
You can carry out a factory reset in two ways:
A. automatically at the end of the Test Mode, refer to Test Mode - 18. Factory Reset (page 41)
B. with the following procedure:
1. Press the [MENU] button.
The display changes to:
2. Rotate the [CURSOR/VALUE] dial to select the "Factory Reset" entry, then press the [ENTER/SELECT] button.
3. Rotate the [CURSOR/VALUE] dial to select "YES", then press the [ENTER/SELECT] button to load the factory settings.
Select "NO" to return to the previous display page without loading the factory settings.
A confirmation message informs you that the BK-5 has been initialized.