Editing The Selected Organ Sound - Roland V-Accordion FR-7X Owner's Manual

Editing the selected organ sound

You can edit the selected preset by proceeding as fol-
lows:
(1) See steps (1)~(7) of "Procedure for assigning
sounds" on p. 51.
(2) Press the [DATA÷ENTER] knob to select the "PATCH"
field.
(3) Rotate the [DATA÷ENTER] knob counterclockwise to
select a patch whose name starts with "TW" ("TW"=
"tonewheel").
Whenever you select such a sound, and [EDIT] field is
displayed. It means that you can edit (change) the
organ sound in question.
(4) Use the [DATA÷ENTER] knob to confirm your selec-
tion.
The sound is assigned to the register you selected
earlier.
(5) Press the [DATA÷ENTER] knob on the "EDIT" field.
The following organ parameters are available and can
be selected by rotating the [DATA÷ENTER] knob:
Footage levels
Percussion
Leakage
Vibrato/Chorus
Overdrive
Rotary
Bellows Crescendo
Mem. Name (name of the sound you create)
Footage levels
This page allows you to set the level of the 9 virtual
harmonic bars. From left to right, the bar icons repre-
sent the following organ footages: 16', 5-1/3', 8', 4',
2-2/3', 2', 1-3/5', 1-1/3' and 1'. For the "TW Pedal"
part, the available footages are 16' and 8' (i.e. only
two harmonic bars).
Each harmonic bar is assigned to a sine wave (pure
tone) of a set pitch. By mixing these sine waves, you
can create a variety of organ sounds.
(1) Press the [DATA÷ENTER] knob to select the "TW
UPPER' (or "TW LOWER" or "TW PEDAL") environ-
ment.
A "USR" field is selected. The FR-7x provides one USR
memory where you can save your own harmonic bar
settings. (There are also 32 or 16 TW presets.)
If you prefer to use one of the preset memories as a
starting point, rotate the [DATA÷ENTER] knob to
select it, then press the [DATA÷ENTER] knob.
(2) Press the [DATA÷ENTER] knob several times to select
the harmonic bar icon whose setting your want to
change.
(3) Rotate the [DATA÷ENTER] knob to set the level of
the selected harmonic bar.
The setting range is 0~8 (where "0" means that the
harmonic bar in question is inaudible).
Note: You can audition the presets while selecting them by
playing on the assigned (treble or bass) keyboard.
(4) Repeat steps (2) and (3) to set the level of the
remaining harmonic bars to your liking.
(5) Press the [EXIT÷JUMP] button to leave this page.
Note: See "Saving your settings" on p. 52 for how to save
your settings if you are happy with the organ sound. Oth-
erwise continue with the next section.
r
V-Accordion
Editing the selected organ sound
53