Editing Playlists - Roland V-Accordion FR-7X Owner's Manual

Editing playlists

If, while programming or using a playlist, you notice
that one song is missing from the list, or if you decide
not to use a given song file after all, you can edit your
playlist.
(1) See steps (1)~(6) below "Using playlists" on p. 42.
(2) Press the [MENU÷WRITE] button.
The display changes to:
(3) Rotate the [DATA÷ENTER] knob to select "EDIT",
then press the [DATA÷ENTER] knob.
The display changes to:
Adding steps
To add a step and assign a song to it:
(a) Rotate the [DATA÷ENTER] knob to select the
"-----END-----" message and press the
[DATA÷ENTER] knob.
(b) Rotate the [DATA÷ENTER] knob to select the song
you want to assign to the first step.
• If the song you want to assign is located in a folder,
rotate the [DATA÷ENTER] knob to select the name of
the folder, then press the [DATA÷ENTER] knob.
• Select the song by rotating the [DATA÷ENTER] knob.
(c) Press the [DATA÷ENTER] knob to confirm you selec-
tion.
This takes you back to the following page. The song is
assigned to the last step of your list, followed by the
"-----END-----" message:
If you also need to move the new step...
(d) Rotate the [DATA÷ENTER] knob to select the song
step you have just added and press [DATA÷ENTER].
(e) Press the [MENU÷WRITE] button to call up the fol-
lowing window:
(f) Rotate the [DATA÷ENTER] knob to select the [UP] or
[DOWN] icon.
Note: The "DOWN" function has no effect on the last step
of your playlist.
(g) Press the [DATA÷ENTER] knob once or several times
to move the selected step to the desired position.
(h) Press [EXIT÷JUMP] to see the list of songs.
(i) To save the playlist, see "Saving your playlist" on
p. 40.
Note: There is also a faster way to move steps: in step (d),
press the [UP]/[DOWN] buttons to move the selected song.
Assigning a different song to an existing step
You can insert a step between two existing steps.
(a) Perform steps (1)~(3) under "Editing playlists".
(b) Rotate the [DATA÷ENTER] knob to select the step
before which you want to insert a new step.
(c) Press the [DATA÷ENTER] knob to confirm.
(d) Press the [MENU÷WRITE] button to call up the fol-
lowing page:
(e) Rotate the [DATA÷ENTER] knob to select the [SONG]
icon.
(f) Press the [DATA÷ENTER] knob.
(g) Rotate the [DATA÷ENTER] knob to select the song
you want to assign to the first step.
• If the song you want to assign is located in a folder,
rotate the [DATA÷ENTER] knob to select the name of
the folder, then press the [DATA÷ENTER] knob.
• Select the song by rotating the [DATA÷ENTER] knob.
(h) Press the [DATA÷ENTER] knob to confirm you selec-
tion.
This takes you back to the following page.
r
V-Accordion
Editing playlists
43