Saving Your Playlist - Roland V-Accordion FR-7X Owner's Manual

FR-7x V-Accordion
® Saving your playlist
The display shows:
(6) If the song you want to assign is located in a
folder, rotate the [DATA÷ENTER] knob to select the
name of the folder, then press the [DATA÷ENTER]
knob.
Note: To leave the current folder and return to a higher
level, select the ".. (level up)" entry at the top.
(7) Select the song by rotating the [DATA÷ENTER] knob.
(8) Press the [DATA÷ENTER] knob to confirm you selec-
tion.
This takes you back to the following page. The song is
assigned to step 01 and step 02 becomes the last one
of your list (-----END-----):
(9) Select the "-----END-----" line and repeat steps
(5)~(8) above to add the required song steps.

Saving your playlist

Preparation for saving
(1) After compiling your playlist, and while the "EDIT"
page is displayed, press the [MENU÷WRITE] button.
The display changes to:
The name of the selected playlist appears next to the
"EDIT" message (top line).
(2) Rotate the [DATA÷ENTER] knob to select "SAVE",
then press the [DATA÷ENTER] knob.
The display changes to:
40
Naming the playlist
(3) Press the [DATA÷ENTER] knob.
The display changes to:
(4) Rotate the [DATA÷ENTER] knob to select the name
in the bottom line.
The first character of the default name is already
selected (see the dark line below the first character).
(5) If necessary, select a different character position
(indicated by a dark line) by rotating the
[DATA÷ENTER] knob.
(6) Press the [DATA÷ENTER] knob to confirm your
selection.
The selected character position is indicated by means
of a dark underscore character.
(7) Rotate the [DATA÷ENTER] knob to select the desired
character, then press the knob to confirm your set-
ting.
The new character now appears on a white back-
ground.
(8) Repeat steps (5)~(7) above to enter the remaining
characters.
Deleting characters
(1) To delete a character, select it by rotating the
[DATA÷ENTER] knob.
The selected character is indicated by means of a dark
underscore character.
(2) Press the [EXIT÷JUMP] button.
The FR-7x automatically selects the "Ins" icon.