HP BladeSystem c3000 Quickspecs page 31

QuickSpecs
Technical Specifications
Mixed Configuration – Full Height and Half Height Population Mixed Configuration – Full Height and Half Height Population
Mixed Configuration – Full Height and Half Height Population Mixed Configuration – Full Height and Half Height Population
The c3000 enclosure is divided into 2 zones or quadrants by the horizontal (vertical on Tower model) support metalwork. Zone 1
includes bays 1, 2, 4, & 5; and Zone 2 contains bays 3, 4, 7, & 8. Within each zone a removable divider is used to support half
height devices. To install a full-height blade in any zone this divider must be removed. An optional mini-divider support bracket is
included with every c3000 enclosure. As a consequence of using the mini-divider in the Zone 2, this zone can only contain one full
height blade and 2 half-height blades. Zone 1 can contain either 4 half-height blades, or by removing the divider, it can contain 2
full-height blades.
NOTE: Please read the RTF card (included with each c3000 enclosure) and the "HP BladeSystem c3000 Setup and Installation NOTE: NOTE: NOTE:
Guide" for more information on using bay dividers and the mini-divider for mixed configurations.
NOTE: NOTE: NOTE: NOTE: Storage or tape blades can be installed in the same zone as both full-height and half-height blades, a bracket ships with
each SB40c that allows a half-height blade to be mounted to the left side of a storage or tape blade.
NOTE: In this case, the SB40c or tape blade cannot be removed without first removing the half height blade and mounting bracket. NOTE: NOTE: NOTE:
NOTE: For Mixed configurations of full height and half height population rules; please see the c3000 Enclosure installation and NOTE: NOTE: NOTE:
users guide at: http://h71028.www7.hp.com/enterprise/cache/316682-0-0-0-121.html
Enclosure Unit – Enclosure Unit – Enclosure Unit – Enclosure Unit –
Rack Model Rack Model
Rack Model Rack Model
Dimensions (H x W x D) Dimensions Dimensions Dimensions
(with bezel)
Weight Weight Weight Weight
(approximate)
Input Requirements Input Requirements Input Requirements Input Requirements
(per AC power supply)
BTU Rating BTU Rating BTU Rating BTU Rating
Power Specifications Power Specifications Power Specifications Power Specifications
Power Supply Output Power Supply Output Power Supply Output Power Supply Output
(per power supply)
DA - 12790 North America — Version 7 — February 11, 2008
10.4 x 19.1 x 32.977 in (265 x 485 x 835 mm)
Maximum
(one enclosure with 8
blades and 4 interconnects
installed)
Minimum
(one enclosure without
blades and interconnects)
Rated Line Voltage
Rated Input Current
Rated Input Frequency
Maximum per power
supply
To review typical system power ratings use the Power Calculator which is
available via the online tool located at URL:
www.hp.com/go/bladesystem/powercalculator
Rated Steady-State Power 800 W (at 100 VAC)
Maximum Peak Power
HP BladeSystem c3000 Enclosure HP BladeSystem c3000 Enclosure HP BladeSystem c3000 Enclosure HP BladeSystem c3000 Enclosure
300 lb (136 kg)
130 lb (59 kg)
90 – – – – 132 VAC
180 – – – – 264 VAC
9.3 A (at 100 VAC)
9.7 A (at 120VAC)
7.8 A (at 200 VAC)
7.2 A (at 208 VAC)
6.8 A (at 220 VAC)
6.2 A (at 240 VAC)
47 to 63 Hz
2728 BTU/hr (at 100 VAC)
3069 BTU/hr (at 120VAC)
4092 BTU/hr (at 200 to 240 VAC)
900 W (at 120 VAC)
1200 W (at 200 to 240 VAC)
880 W (at 100 VAC)
990 W (at 120 VAC)
1350 W (at 200 to 240 VAC)
Page 31