System Technical Specifications; System Board - HP Z210 SFF Quickspecs

QuickSpecs

System Technical Specifications

System Board

System Board Form
Factor
Processor Socket
CPU Bus Speed
Chipset
Memory Expansion Slots 4 DDR3 memory slots
Memory Type Supported DDR3, UDIMM (Unbuffered), ECC & non-ECC
Memory Modes
Memory Speed Supported 1333MHz DDR3
Memory Protection
Maximum Memory
Memory Configuration
(Supported)
PCI Express Connectors
PCI Connectors (5.0V)
Supported Drive
Interfaces
BTX 21.2mm x 26.7mm
Single LGA 1155
DMI
Intel® PCH C206
Non-Interleaved for single channel. Interleaved when both channels are populated.
ECC available on data.
16GB
MEMORY LOADING CONFIGURATIONS
1GB, 2GB and 4GB ECC and non-ECC unbuffered DIMMs are supported, but not if mixed.
NOTE: * Maximum memory capacities assume 64-bit operating systems, such as genuine Genuine
Windows® 7 Professional 64-Bit, Genuine Windows® 7 Professional 64-bit Downgrade to Genuine
Microsoft® Windows® XP Professional 64-bitRed Hat Linux 64-bit. Genuine Windows Vista Home 32 and XP
Professional (32-bit) support up to 4 GB. 32-bit Linux supports up to 8 GB.
1 PCI Express Gen2 x16 LP slot (x16 electrical/x16 mechanical)
1 PCI Express Gen2 x16 LP slot (x4 electrical/x16 mechanical)
1 PCI Express Gen2 x1 LP slot (x1 electrical/x1 mechanical)
NOTE: LP = low profile
NOTES: In the PCIe x16 (x16 electrical/x16 mechanical) Gen 2 slot, if it is not being used for a graphics card,
only cards certified as After Market Options for this platform are supported.
1 PCI LP slot
SATA
DA - 13873 Worldwide — Version 26 — October 4, 2013
Integrated (4) Serial ATA interfaces (2x 6Gb/s SATA in blue, 2x 3Gb/s SATA in
black). One port can optionally be used for eSATA.
supports a maximum of two SATA/SSD drives only. RAID 0 and 1 supported.
HP Z210 SFF Workstation
NOTE: the Z210 SFF
Page 13