Keyless Starting - Ford Mondeo Quick Reference Manual

Recalling a stored seat position
Note: To stop seat movement during a
recall, press any driver seat adjustment
control, any of the memory buttons or any
mirror control switch. Seat movement will
also stop if you move the vehicle.
Passive recall
Note: If more than one passive key is in
range, the memory function will move to the
settings of the first key stored.
When you unlock the vehicle with the
remote control or pull the driver door handle
with a passive key in range, the seat and
mirrors will move to the position stored on
that remote control or passive key.
Active recall
Press the pre-set button associated with
the desired driving position. The seat and
mirrors will move to the position stored on
that pre-set.
Resetting the memory
If any seat position travel is interrupted (e.g.
an obstacle in the way or loss of power
supply), you will need to reset the memory.
Note: Make sure all electrical accessories
are switched off.
1. Turn the ignition to position II.
2. Operate the seat adjustment control to
move the seat in the required direction
until it stops. A click will be heard.
3. Release the seat adjustment control
and immediately press and hold the
switch in the same direction for at least
3 seconds. Keep it held until the seat
stops at the mechanical end of its travel
and a click is heard.
4. Release the seat adjustment control.
5. Operate the same seat adjustment
control in the opposite direction for at
least 3 seconds. Keep it held until the
seat stops at the mechanical end of its
travel and a click is heard.

KEYLESS STARTING

WARNINGS
For all warnings and cautions, refer
to your Owner's handbook.
The keyless starting system may not
function if the key is close to metal
objects or electronic devices such as
mobile phones.
E85766
Press the start button once.
Starting with automatic
transmission
Note: Releasing the brake pedal during
engine start may stop the engine cranking
and return to ignition on.
1. Make sure the transmission is in P or N.
2. Fully depress the brake pedal.
3. Press the start button.
Starting with manual transmission
Note: Releasing the clutch pedal during
engine start will stop the engine cranking and
return to ignition on.
1. Fully depress the clutch pedal.
2. Press the start button.
10