Memory Function - Ford Mondeo Quick Reference Manual

To deactivate the fuel operated heater:
E70499
1. Press the right arrow button on the
steering wheel to enter the main menu.
2. Highlight Setup with the up and down
arrow buttons and press the right arrow
button.
3. Highlight Aux. Heater and press the
OK button to toggle the heater on and
off. A cross appears in the box when the
heater is activated.
4. Press the left arrow button to exit the
menu. Hold the left arrow button
pressed to return to the trip computer
display.
Diesel auxiliary heater (depending
on country)
The diesel auxiliary heater (PTC electrical
heater) aids in warming the vehicle interior
on vehicles with a diesel engine. It is
switched on or off automatically depending
on the outside air temperature, the coolant
temperature and the alternator load.

MEMORY FUNCTION

WARNINGS
Before activating the seat memory,
make sure that the area immediately
surrounding the seat is clear of
obstructions and that all occupants are
clear of moving parts.
The memory store function cannot
be used when the vehicle is moving.
A
E86768
A Seat adjustment controls
B Memory pre-set buttons
Up to four different driver's seat and
exterior mirror positions can be stored in
the memory. Your preferred setting for the
reverse mirror dipping feature can also be
stored.
Setting a memory pre-set
Passive setting
The vehicle stores the seating and mirror
positions for up to four remote controls or
passive keys. Next time the vehicle is
unlocked, the position of the seat and
mirrors will adjust to the last used position.
Each time you turn the ignition off, the
current seat and mirror settings are stored
on the remote control or passive key used.
Active setting
1. Turn the ignition on.
2. Adjust the seat and exterior mirrors to
the desired position.
3. Press and hold the desired pre-set
button B until a single chime sounds to
confirm.
9
B