Wireless Mac Filtering - TP-Link TL-WR1043ND User Manual

• Radius Server IP - Enter the IP address of the Radius Server.
• Radius Port - Enter the port that radius service used.
• Radius Password - Enter the password for the Radius Server.
• Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
WPA-PSK/WPA2-PSK - It's the WPA/WPA2 authentication type based on pre-shared
passphrase.
• Version - you can choose the version of the WPA-PSK security on the drop-down list. The
default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
• Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
either Automatic, or TKIP or AES as Encryption.
Note:
If you check the
find a notice in red as shown in
• PSK Passphrase - You can enter ASCII characters between 8 and 63 characters or 8 to
64 Hexadecimal characters.
• Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
4.6.3

Wireless MAC Filtering

Choose menu "Wireless→MAC Filtering", and then you can control the wireless access by
configuring the Wireless MAC Address Filtering function, shown in Figure 4-20 .
WPA-PSK/WPA2-PSK
Figure 4-19.
Figure 4-19
TL-WR1043ND Wireless N Gigabit Router
radio button and choose TKIP encryption, you will
-41-