TP-Link TL-WR1043ND User Manual page 28

Method Three:
Step 1. Keep the default QSS Status as Enabled and click the Add device button in Figure 4-2,
then the following screen will appear.
Step 2. Choose Press the button of the new device in two minutes and click Connect.
Step 3. For the configuration of the wireless adapter, please choose Push the button on my
access point in the configuration utility of the QSS as below, and click Next.
Figure 4-3 Add A New Device
The QSS Configuration Screen of Wireless Adapter
TL-WR1043ND Wireless N Gigabit Router
-21-