TP-Link TL-WR1043ND User Manual page 114

Figure A-5 Add or Modify a Virtual server Entry
Note:
Your opposite side should call your WAN IP, which is displayed on the "Status" page.
4) How to enable DMZ Host: Log in to the Router, click the "Forwarding" menu on the left
of your browser, and click "DMZ" submenu. On the "DMZ" page, click Enable radio
button and type your IP address into the "DMZ Host IP Address" field, using
192.168.1.169 as an example, remember to click the Save button.
5) How to enable H323 ALG: Log in to the Router, click the "Security" menu on the left of
your browser, and click "Basic Security" submenu. On the "Basic Security" page,
check the Enable radio button next to H323 ALG. Remember to click the Save button.
TL-WR1043ND
Figure A-6 DMZ
-107-
Wireless N Gigabit Router