Removing And Reinstalling The Front Bezel - Lenovo 3376 Maintenance Manual

Machine types: 3376, 3377, 3378, 3386, 3387, and 3388
Table of Contents

Advertisement

This section provides instructions on how to remove the computer cover.
CAUTION:
Turn off the computer and wait three to five minutes to let the computer cool before removing the
computer cover.
To remove the computer cover, do the following:
1. Remove any media from the drives and turn off all attached devices and the computer.
2. Disconnect all power cords from electrical outlets.
3. Disconnect the power cords, Input/Output cables, and any other cables that are connected to the
computer. See "Locating connectors, controls, and indicators on the front of your computer" on page
74 and "Locating connectors on the rear of your computer" on page 75.
4. Remove any locking device that secures the computer cover, such as a padlock or an integrated
cable lock.
5. Remove the two screws that secure the computer cover and slide the computer cover to the rear to
remove it.
Figure 54. Removing the computer cover

Removing and reinstalling the front bezel

Attention:
Do not open your computer or attempt any repair before reading and understanding "Important safety information"
on page 1.
This section provides instructions on how to remove and reinstall the front bezel.
To remove and reinstall the front bezel, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See "Removing the computer cover" on page 119.
120
ThinkCentre Edge Hardware Maintenance Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

33883377337833863387Thinkcentre edge

Table of Contents