Removing the WiFi adapter card
To remove a WiFi adapter card, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See "Removing the computer cover" on page 81.
3. If your computer comes with a WiFi card module that supports the Bluetooth function, disconnect
the Bluetooth cable from the WiFi adapter card.
Figure 40. Disconnecting the Bluetooth cable
Note: The Bluetooth cable connects the Bluetooth connector on the WiFi adapter card to the front USB
connector on the system board to support the Bluetooth function.
4. At the rear of the computer, remove the screw that secures the PCI card latch.
108
ThinkCentre Edge Hardware Maintenance Manual