Installing The Microprocessor And Heat Sink Assembly - Lenovo 5106 Maintenance Manual

10. Carefully lift the microprocessor straight up and out of the socket, and place it on a static-protective
surface.

Installing the microprocessor and heat sink assembly

To install a microprocessor and heat sink assembly, do the following:
1. Touch the static-protective package that contains the new microprocessor to any unpainted metal
surface on the computer; remove the microprocessor from the package.
2. Align the microprocessor
3 and 4 ); carefully place the microprocessor on the socket and close the microprocessor bracket frame.
Note: The microprocessor fits only one way on the socket.
90
ThinkCentre Hardware Maintenance Manual
1 with the socket (note the alignment mark 2 and the position of the notches