Table of Contents
Advertisement
Figure 26. Securing a memory module with the latches
5. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 55.
Replacing the heat sink and fan assembly
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
CAUTION:
The heat sink and microprocessor might be very hot. Before you open the computer cover, turn off the
computer and wait several minutes until the computer is cool.
1. Remove the computer cover. See "Removing the computer cover" on page 14.
2. Remove the front bezel. See "Replacing the front bezel" on page 15.
3. Pivot the drive bay assembly upward. See "Pivoting the drive bay assembly upward and downward" on
page 18.
4. Disconnect the microprocessor fan cable from the system board.
5. Replace the heat sink and fan assembly.
24
V530-15ICB User Guide and Hardware Maintenance Manual
Advertisement
Table of Contents
