Appliance Setup; Remove Fixed Glass Assembly; Remove The Shipping Materials; Clean The Appliance - Heat & Glo 8000CF-OAK-IPI Owner's Manual

14 14

Appliance Setup

A. Remove Fixed Glass Assembly
See Section 14.I.
B. Remove the Shipping Materials
Remove shipping materials from inside or underneath the
fi rebox.
C. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated
inside the fi rebox or underneath in the control cavity.
D. Accessories
Install approved accessories per instructions included
with accessories. Contact your dealer for a list of ap-
proved accessories.
WARNING! Risk of Fire and Electric Shock! Use ONLY
Hearth & Home Technologies-approved optional acces-
sories with this appliance. Using non-listed accessories
could result in a safety hazard and will void the warranty.
E. Removing Optional GFK-160A Fan
ITEM SEE FIGURE 14.1
1 Remove front from the fi replace.
2 Remove glass assembly from the fi replace.
3 Remove logs.
4 Remove grate.
5 Remove optional side and back refractory.
6 Remove base refractory.
7 Remove burner assembly.
8 Remove steel false base pan.
9 Remove valve assembly.
Disconnect fan and remove it through the valve
10
assembly cavity.
Figure 14.1
6
1
4
7
10
8
9
2
Heat & Glo • 8000CF-OAK-IPI • 2059-900 Rev. Q • 11/08
REMOVE FAN THROUGH
VALVE ASSEMBLY CAVITY
Figure 14.2
Figure 14.3 Rheostat Location
10
RHEOSTAT
47