Fujitsu Stylistic Manual page 65

Problem
I want to remove
the driver
(Windows XP)
Possible Cause
Windows XP:
When removing the driver, make sure that the device
is attached to the computer. If you try to remove the
driver while the device is detached from the
computer, the driver is not removed.
1. Click [Start], right click [My Computer], and then
2. Click the [Hardware] tab.
3. Click [Device Manager].
4. Click [+] beside [Network adapters].
5. Right click [Intersil PRISM Wireless LAN PCI
6. Click [OK].
7. Close [System Properties].
8. Make sure that the icon has disappeared from the
9. Click [Start] -> [Control Panel]. [Control Panel] appears.
10. Double-click [Add/Remove Programs]. [Add/
11. Perform the following steps.
12. Click [Yes]. When the driver is removed, a window
13. Click [OK].
14. Close [Add/Remove Programs] and [Control Panel].
15. Shut down Windows, and turn off the computer.
W i r e l e s s L A N U s e r 's G u i d e
Possible Solution
click [Properties] from the menu that appears.
[System Properties] appears.
Card], and click [Uninstall] from the menu that is
displayed. [Confirm Device Removal] appears.
task tray in the lower right corner of the screen.
Remove Programs] appears.
• Click [PRISM 11Mbps Wireless LAN for Windows].
• Click [Change/Remove].
A window appears asking you if you really
want to remove the driver.
appears showing that the driver has been removed.
57