Care And Maintenance; Protecting The Display Screen - Fujitsu Stylistic Manual

Care and Maintenance

This chapter gives you pointers on how to care
for and maintain your Stylistic ST4110 Fujitsu
Tablet PC.

PROTECTING THE DISPLAY SCREEN

The Stylistic ST4110 Fujitsu Tablet PC is
designed to provide you with years of service.
Using a screen protector will help ensure that
the screen remains as clear as possible. When
installed, the screen protector becomes a
durable, replaceable writing surface that
protects the display screen from abrasion.
If you are replacing the battery, wait until
system operation is suspended and the
power icon is flashing before you remove
the battery. Failure to do so could result in
loss of your unsaved data. (Note that if the
Resume On LAN function is enabled in the
BIOS setup, you should not remove the
battery unless the system is shut down.
When Resume ON LAN is enabled, the
bridge battery is disabled in order to
optimize battery life.)
To install a new screen protector on your Tablet PC:
1. If a screen protector is already installed on
the display screen, remove it before installing
the new screen protector.
The screen protector is held onto the display
screen surface by a thin strip of adhesive
around the edges. A notch in one corner of
the screen protector allows you to slide your
fingernail under the screen protector for easy
removal.
2. Clean the display by wiping the screen
gently using a soft cotton cloth dampened
with isopropyl alcohol. Ensure that all residue
has been removed from the screen before
applying a new screen protector.
3. Remove the protective coating from the
adhesive side of the screen protector first, as
shown in Figure 3-1.
C a r e a n d M a i n t e n a n c e
• The Stylistic ST4110 Fujitsu Tablet PC is
not water- proof. Do not pour liquids on
the system or wash it with a heavily soaked
cloth.
• Do not place items on the top of the display,
or damage may occur.
Figure 3-1 Removing the Protective Sheet
4. Apply the screen protector to the display
screen surface. When doing so, orient the
screen protector with the adhesive side of the
screen protector facing the display screen and
the notched corner of the screen protector
oriented as shown in Figure 3-2.
Figure 3-2 Installing the screen protector
31