Preparation; Pressure Relief Procedure; Grounding And Electric Requirements - Graco 310645H Repair And Parts Manual

Pressure Relief Procedure

1 Turn Main Power Switch
(A) OFF.
2 Turn fluid flow regulator
(K) all the way down to
reduce pressure.
3 Open gun air valve (aa).
4 Trigger gun, spraying
material back into
hopper (C).
310645H

Preparation

Grounding and Electric Requirements

The sprayer must be grounded. Grounding reduces the
risk of electrical shock by providing an escape wire for
the electrical current.
WARNING
ti4292a
Read warnings, page 3.
• The sprayer cord includes a
grounding wire with an appro-
priate grounding prong.
K
ti4303a
• The plug must be plugged into
an outlet that is properly
installed and grounded in
accordance with all local codes
and ordinances.
A
• Do not modify plug! If it will not
ti4000a
fit in outlet, have grounded out-
let installed by a qualified elec-
trician.
• Sprayer model electric require-
ments are provided on page 2.
Extension Cords
• Only use an extension cord with
an undamaged 3-prong plug.
ti4294a
• For up to 100 ft (30.48 m) cord,
use 3-wire, 12 AWG (2.5 mm
minimum.
Preparation
Ground
ti4295a
ti4296a
ti4297a
Ground
2
)
ti4295a
7