Graco 310645H Repair And Parts Manual page 8

Electric texture sprayer for water-based materials only maximum working air pressure: 45 psi (3.1 bar) maximum working fluid pressure: 100 psi (6.9 bar)
Table of Contents

Advertisement

Auxiliary Air Compressor
• Use Auxiliary Air Hookup Kit 287328 when additional
atomization air is necessary.
CAUTION
Attaching auxiliary air to sprayer without using the
Auxiliary Air Hookup Kit will damage sprayer.
Generators
7500 W (7.5 KW) minimum.
Tips for Using Generators
• Before running sprayer, make sure it is at room tem-
perature. This will reduce startup current.
• Run generator at full throttle.
8
Hose Lengths
• The system comes with a twin line hose set consist-
ing of a 1 in. ID x 25 ft (25 mm x 7.6 m) material hose
and a 3/8 in. ID air hose. Additional hose sections can
be added. Total final length of hose used should not
exceed 100 feet in length.
CAUTION
Sprayer air hose fitting can get hot! Allow sprayer to
cool down 5 minutes before removing air hose.
Preparation
310645H

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rtx 1500 248201Rtx 1500 248370Rtx 1500 248315

Table of Contents