Using the Sequencer to Create a Song
Saving the Recorded Song to Disk
Let's save our new song onto a disk. If it's not saved, all of the song data will be lost
when the power to the Fantom is switched off, or in the event of a power
interruption.
Formatting a Disk
Before you can save Fantom data to a new disk or a disk that's been formatted for
another device, the disk must be formatted by the Fantom.
1
Set the protect tab of the disk to the Write position.
fig.Q-49.e
2
Insert the disk into the disk drive.
fig.Q-49a
3
Press [MENU].
The Menu window appears.
fig.Q-39_60
42
Protect tab
Write (writing permitted)
Protect (writing prohibited)
Formatting deletes all data
previously written on the disk.
Check the disk's contents very
carefully before formatting to
make sure you don't lose any
important data.