Use The Keyboard To Record A Melody Track - Roland Fantom Quick Start Manual

Using the Sequencer to Create a Song
8
When you finish recording, press [STOP/PLAY].
The [REC] indicator goes dark.
9
Press [ARPEGGIO] to make its indicator light go out.
10
Press [RESET] to return to the first measure, and then press [STOP/
PLAY] to play the song back and verify that your bass part was
recorded correctly.

Use the Keyboard to Record a Melody Track

Finally, we'll play the keyboard to record the melody track while listening to the
drums and bass you've already recorded.
1
Make sure that Multitimbre "PRST: 05 Pop" is selected and that the
MULTITIMBRE PLAY screen is displayed.
2
Move the cursor to the part list, and press
(the melody track).
Next to Part 1, you can see "
currently selected part (current part).
fig.Q-48
3
Press [REC].
The [REC] indicator blinks, and the Recording Standby window appears.
4
Make sure that the various parameters of the Recording Standby
window are set correctly (p. 38).
40
or
" symbol. This symbol shows that Part 1 is the
If you are not satisfied with the
realtime recording you just
made, you can press [MENU],
and from the Menu window
that appears, select "Undo
Realtime Recording" to return
to the state prior to recording
(Undo).
to select Part 1