NETGEAR N150 Setup Manual page 28

N150 wireless router

Hide thumbs Also See for N150:

Table of Contents

perform any WPS connection using the router settings, use the procedures below. (For more

information on setting up a mixed network, see the online User Manual.

To add a WPS client to your network:

www.routerlogin.com in the address field of your browser, and then click Enter.

On the router main menu, select Add a WPS Client. The Add WPS Client wizard screen

displays. Click Next.

Figure 14

Select the method for adding the WPS client. A WPS client can be added using the push-

button method or the PIN method.

•

Using the Push-Button. This is the preferred method.

–

Select the Push-Button radio box and either press the WPS push-button on the router

or click the soft WPS push-button on the screen (as shown below).

–

The router will attempt to communicate with the client; you have 2 minutes to enable

WPS from the client device using the client's WPS networking utility.

Figure 15

Configuring Your Wireless Network

Table of Contents

Troubleshooting