If You Cannot Exit Connect Copy - Ricoh AFICIO 1055 Operating Instructions Manual

Troubleshooting

If You Cannot Exit Connect Copy

Machine Status
Nothing happens when you
press the [Connect] key.
5
256
Problem/Cause
Originals are being scanned or
copied.
There is a paper misfeed in ei-
ther the master unit or sub-
unit.
The master unit { { { { Clear/Stop} } } }
key was pressed and scanning
of the original has been inter-
rupted.
The { { { { Clear/Stop} } } } key was
pressed on either the master
unit or sub-unit and copying
has been interrupted.
Action
Press the master unit
{ { { { Clear/Stop} } } } key and then
press the [Cancel] key to cancel
scanning or copying.
Clear the paper misfeed in the
master unit or sub-unit.
Reference
⇒ p.270 "x Clearing Mis-
feeds"
⇒ p.283 "e Removing
Jammed Staples"
If the display shows that a
cover is open, follow the in-
structions given. For all other
situations, follow the instruc-
tions on the display.
To exit Connect Copy mode,
press the master unit
{ { { { Clear/Stop} } } } key, then press
the [Connect] key.
To exit Connect Copy mode,
follow the instructions on the
display, then press the [Can-
cel] key.
To exit Connect Copy mode,
follow the instructions on the
display, then press the [Can-
cel] key.