If You Cannot Exit From Connect Copy - Ricoh Aficio 3260C Operating Instructions Manual

Troubleshooting

If You Cannot Exit from Connect Copy

Problem
There is no response when
you press [
5
128
Causes
Scanning of originals is still
in progress.
]
Copying is in progress.
A paper misfeed has oc-
curred on either the main
or sub-machine.
A paper misfeed has oc-
curred on either machine,
or toner or other supplies
need to be replenished.
A paper misfeed has oc-
curred during stapling.
Solutions
Press the { { { { Clear/Stop} } } } key on the
main machine, and then press [Yes].
Follow the instructions displayed.
Reference
"Clearing Misfeeds", General
Settings Guide
"Removing Jammed Staples",
General Settings Guide
"Removing Punch Waste", Gen-
eral Settings Guide
If the sub-machine's display indi-
cates that a cover is open, follow the
instructions shown.
To cancel Connect Copy, Press the
{ { { { Clear/Stop} } } } key on the main ma-
chine, and then press [Yes].
Follow the instructions displayed.
Reference
"Adding Toner", General Settings
Guide
"Clearing Misfeeds", General
Settings Guide
"Loading Paper", General Set-
tings Guide
"Adding Staples", General Set-
tings Guide
"Removing Punch Waste", Gen-
eral Settings Guide
To cancel Connect Copy, Press the
{ { { { Clear/Stop} } } } key on the main ma-
chine, and then press [Yes].
Removed the jammed paper.
Reference
"Removing Jammed Staples",
General Settings Guide
To cancel Connect Copy, Press the
{ { { { Clear/Stop} } } } key on the main ma-
chine, and then press [Yes].