Changing Fax Resolution; Setting Your Changes As The New Default - Brother MFC-J5910DW Advanced User's Manual

Chapter 3
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
• When you send a color fax.
• When you choose Photo as the Fax
Resolution.

Changing fax resolution

The quality of a fax can be improved by
changing the fax resolution.
a
Press (FAX).
b
Press Options.
c
Press s or t to display
Fax Resolution.
d
Press Fax Resolution.
e
Press s or t to display the resolution
options, and then press the option you
want.
Note
You can choose four different resolution
settings for black & white faxes and two for
color faxes.
Black & White
Suitable for most typed
Standard
documents.
Good for small print and
Fine
transmits a little slower than
Standard resolution.
Good for small print or artwork
S.Fine
and transmits slower than Fine
resolution.
Use when the document has
Photo
varying shades of gray or is a
photograph. Photo has the
slowest transmission.
12
Color
Standard
Fine
If you choose S.Fine or Photo and then
use the Color Start key to send a fax, the
machine will send the fax using the Fine
3
setting.
Setting your changes as the
new default
You can save the fax settings for
Fax Resolution, Contrast,
Real Time TX and Glass ScanSize you
use most often by setting them as default.
These settings will stay until you change
them again.
a
Press
b
Press Options.
c
Press s or t to choose the setting you
want to change, and then press your
new option.
Repeat this step for each setting you
want to change.
d
After changing the last setting, press
s or t to display Set New Default.
e
Press Set New Default.
f
Press OK.
g
Press Yes.
h
Press Stop/Exit.
Suitable for most typed
documents.
Use when the document is a
photograph. The transmission
time is slower than Standard
resolution.
(FAX).
3