Setting The Dim Timer For The Backlight; Dial Prefix; Setting Up Or Changing The Prefix Number - Brother MFC-J5910DW Advanced User's Manual

Setting the Dim Timer for the
backlight
You can set how long the LCD backlight stays
on after you go back to the Ready screen.
a
Press Menu.
b
Press s or t to display
General Setup.
c
Press General Setup.
d
Press s or t to display
LCD Settings.
e
Press LCD Settings.
f
Press s or t to display Dim Timer.
g
Press Dim Timer.
h
Press s or t to display 10Secs,
20Secs, 30Secs or Off, and then
press the option you want.
i
Press Stop/Exit.

Dial Prefix

1
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example, if your telephone
system requires a 9 to dial an outside
number, use this setting to automatically dial
9 for every fax you send.
Setting up or changing the
prefix number
a
Press Menu.
b
Press s or t to display
Initial Setup.
c
Press Initial Setup.
d
Press s or t to display Dial Prefix.
e
Press Dial Prefix.
f
Press On (or Off).
g
Press Dial Prefix.
h
Enter the prefix number (up to 5 digits)
by pressing the buttons on the screen.
i
Press OK.
Note
• To access an outside line, press ! .
• You cannot use ! with any other numbers
or characters.
• (Canada only) If the pulse dialing mode is
on, # and l are not available to use.
j
Press Stop/Exit.
General setup
1
1
1
5