Setting Up The Treadmill - Healthrider 831.297872 User Manual

ASSEMBLY
Assembly requires two people. Place the treadmill in a cleared area and remove all packing materials. Do not dis-
pose of the packing materials until assembly is completed. No tools are required.
1. With the help of a second person, carefully raise the
Uprights (82) until the Front Wheels (77) are resting on
the floor as shown.
2. Remove the paper backing from the Wrench Clip (71).
Press the Wrench Clip onto the Frame (92) in the indi-
cated location. Press the Allen Wrench (72) into the
Wrench Clip. Note: The use of the Allen Wrench is
described on pages 17 and 18.
3. Make sure that all parts are tightened before you use the treadmill. Place a mat beneath the treadmill
to protect the floor or carpet.
1
2
92
72
5
82
77
71