Frigidaire FLSG62MRFS4 Installation Instructions Manual

Installation
Instructions
Full Size Laundry Center
Gas & Electric
Before beginning installation, carefully read these instructions. This will simplify the installation
and ensure the laundry center is installed correctly and safely. Leave these instructions near the
laundry center after installation for future reference.
NOTE: The electrical service to the laundry center must conform with local codes and ordinances
and the latest edition of the National Electrical Code, ANSI/NFPA 70, or in Canada, CSA C22.1
Canadian Electrical Code Part 1.
NOTE: The gas service to the laundry center must conform with local codes and ordinances and
the latest edition of the National Fuel Gas Code ANSI Z223.1 or in Canada, CAN/CGA B149.12.
NOTE: The laundry center is designed under ANSI Z21.5.1 or ANSI/UL 2158 - CAN/CSA C22.2
(latest edition) for HOME USE only. This laundry center is not recommended for commercial
applications such as restaurants or beauty salons, etc.
For your safety the information in
this manual must be followed to minimize the risk
of fire or explosion or to prevent property damage,
personal injury or loss of life.
ll_e aa_...,lne or
- DO not store or <
._q,,r
other flammable
vapors and liquid in the vicinity ol this or any
other appliance.
- WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use
any phone in your building.
• Clear the room, building or area of all
occupants.
• Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier, call the
fire department.
Installation and service must be performed by a
qualified installer, service agency or the gas
supplier.
_rinted in U.S.A.
Contents
SUBJECT
Pre-lnstallation Requirements
Electrical Requirements
Drain Requirements
Exhaust System Requirements
Gas Supply Requirements
Location
Mobile Home Installation
Rough-In Dimensions
Unpacking
Electrical Installation
Grounding Requirements
3 & 4-Wire Connections
Installation
Replacement Parts
PAGE
2
2
2
2
3
4
4
4
5
5
6
6
7
7
8
PiN134182900 (0212)