Updating Firmware - DRIFT GHOST-S User Manual

Updating Firmware

The Drift Ghost-S should always be operated on the latest firmware available,
downloadable from www.driftinnovation.com. Be sure to check back often for
updates as we will continue to add features and options to your camera after you
purchase it
1. Go to www.driftinnovation.com and download the latest firmware file
(''Ghost_S.bin'') found easily in the Drift Ghost-S section, or by navigating to
'Firmware' listed in the bottom footer of any page.
2. Plug your Drift Ghost-S unit into your computer (MAC or PC) using the
supplied USB cable.
3. Your camera should come up as an External Device with the ''Drift Card''
Micro SD card being visible as a storage device (see connectivity p19). Please
copy the ''Ghost_S.bin'' firmware file into the root folder of the ''Drift Card''
Micro SD card.
4. Safely eject your Drift Ghost-S and Micro SD as a storage device from your
computer.
5. Power on the camera and wait for it to automatically update itself. You will get
a "Firmware Update in Progress" message and the LED status indicator will
blink red. This should take a few seconds and the camera will automatically
power off after.
6. Power the unit on again.
7. Navigate to the settings menu and check the "Firmware Version" to ensure the
firmware has been successfully updated.
!
Your camera might shut off automatically once more after step 6, this is normal.
Simply turn the unit back on. This step is necessary in order to refresh a set
of Wi-Fi initialisation code that only needs to be refreshed once per firmware
update.
21