Thank you for purchasing the Drift Stealth 2 CUSTOMER SUPPORT Check our official website for firmware updates, customer support, news about our products and videos from our users. about your camera | initial setup 3—4 If you have any suggestions, comments or concerns, please...
about your camera initial setup MODE/ Tag / Simultaneous Photo Button 1. Unscrew and remove CYCLE OPTION Button the rear hatch ACTION Button 2. Insert a Class 6 or (On/Off/Rec/Stop) higher Micro SD/HC/ Status LED card (up to 32GB) Format before first Lens “Up”...
package contents getting started Universal Clip POWER ON AND OFF MODE NAVIGATION USB Cable (Micro-B) To change the current 1. Press and hold the 25 FPS 1080p camera recording mode ACTION button to 12:05:59 press the [MODE] button, power on changing between;...
mode selection settings VIDEO MODE PHOTO MODE PHOTOBURST MODE CAMERA SETTINGS (Green LED) The camera (Yellow LED) The camera (Cyan LED) The camera •EXPOSURE -2.0 / -1.0 / 0 / +1.0 / +2.0 •DATE YEAR / MONTH / DAY will record video when will capture still images will capture a burst of still •SELF-TIMER...
CAR DVR MODE MODE INDICATOR VIDEO TAGGING the loop recording, but VIDEO MODE without saving any footage. The Drift Stealth 2 features When activated, this feature below) While recording video, This hands off mode setting The LED will be blinking...
Get connected with the Drift Become immersed with the Attach your Drift camera to Two-Way remote control. Stealth II Waterproof Case. any vented bike, ski, or similar...
USB cable using the USB cable powered off, connect option and press ACTION, on your device. and copy the STEALTH 2.bin (provided); the camera (provided); the camera the camera using a micro and select P and press file to a formatted micro...
specifications Video resolution: 1080p, 720p and WVGA (16:9); 960p (4:3) Memory capacity: Micro SD memory cards up to 32GB File format: .MP4 (H.264 codec) Outputs: Micro HDMI connector - type D (cable not included) Sensor type: CMOS Connectivity: USB Plug and Play, micro-B USB connector Frame rate:- Compatibility: Windows XP and up / Mac OS 10.2 and up...
Page 10
This device complies with part 15 of the FCC Rules. Operation is subject to the following This STEALTH 2 meets the government's requirements for exposure to radio waves. The two conditions: (1) This device may not cause harmful interference, and (2) this device must guidelines are based on standards that were developed by independent scientific accept any interference received, including interference that may cause undesired operation.