Cabin Selection; Speaker Setting - Kenwood KDV-U4349 Instruction Manual

Cabin Selection

You can compensate the delay of the sound arrival
time by selecting your environment from the
following car types;
Car type Display
Not compensating. "OFF"
Compact car "COMPACT"
Full size car "FULLSIZE"
Station wagon "WAGON"
1
Enter Cabin select mode
1 sec., and select "DSP"
Press [ ]
"CABIN".
Press the [AUD] knob.
• For how to select Function Control items, refer to
<Function Control> (page 10).
2
Select the car type
Turn the [AUD] knob and push the center when
the desired item is displayed.
3
Exit Cabin select mode
Press the [ ] button.
⁄
• You can compensate the distances in more details by
using <DTA setting> (page 28) function.
Car type Display
Minivan "MINIVAN"
Sport-utility vehicle "SUV"
Minivan long "MV LONG"
> >
"SETUP"

Speaker Setting

Setting the speaker to be connected, speaker size,
and installation position;
Setting item
Front Speaker Location
>
"FRONT" "LOCATION"
Front Speaker Size
>
"FRONT" "SIZE"
Front Tweeter
>
"FRONT" "TWEETER"
Rear Speaker Location
>
"REAR" "LOCATION"
Rear Speaker Size
>
"REAR" "SIZE"
Subwoofer Size
>
"SUB-W" "SIZE"
1
Enter Speaker Setting mode
1 sec., and select "DSP"
Press [ ]
"SPEAKER".
Press the [AUD] knob.
• For how to select Function Control items, refer to
<Function Control> (page 10).
2
Select the speaker you want to set
Turn the [AUD] knob and push the center.
"FRONT"/ "REAR"/ "SUB-W"
3
Select the item you want to set
Turn the [AUD] knob and push the center.
4
Set the value
Turn the [AUD] knob and push the center when
the desired item is displayed.
5
Exit Speaker Setting mode
Press the [ ] button twice.
Range
"DOOR"/ "ON DASH"/ "UND DASH" (Under
dash)
O.E.M./ 10 cm/ 13 cm/ 16 cm/ 17 cm/ 18
cm/ 4×6/ 5×7/ 6×8/ 6×9/ 7×10
"NONE"/ "USE"
• "DOOR"/ "R-DECK"
• "2ND ROW"/ "3RD ROW" (Minivan/
Minivan long)
None/ O.E.M./ 10 cm/ 13 cm/ 16 cm/
17 cm/ 18 cm/ 4×6/ 5×7/ 6×8/ 6×9/
7×10
None/ 16 cm/ 20 cm/ 25 cm/ 30 cm/
38 cm over
>
"SETUP"
English
>
27
|