Using The Dolby ® Digital Dynamic Range Control Feature; Audyssey Premium Television - Toshiba 32L4300UC User Manual

NOTE
Using the Dolby
You can further compress Dolby
dynamic range so you can switch from digital to analog broadcasts at the
same dynamic range.
1 Press the SETUP button.
2 Select Sound > Dynamic Range Control and press the OK button.
3 Press the p / q (arrow) buttons to select On.
NOTE

Audyssey Premium Television™

These televisions use a suite of technologies for better sound including:
Audyssey EQ
❖
out of the box. This technology ensures you enjoy your audio
experience as much as your video.
This feature is grayed out when Audio Delay is in Auto.
❖
A time lag will occur when the video signal or audio signal is changed.
❖
Adjust the timing accordingly.
When adjusting the timing, turn down the volume of the AV equipment
❖
used as far as possible.
Depending on the equipment, noise etc. may occur when the signal is
changed.
Depending on the connected equipment (amplifier, etc.), adjustment
❖
may not be possible.
When the optical audio output setting (Auto t PCM) is changed, it
❖
may be necessary to adjust the timing again.
Do not use other than for audio output from the AV amplifier, etc.
❖
(Malfunction may occur)
®
Digital Dynamic Range Control feature
This feature is available when Dolby
to the TV in the following situations:
When tuned to a digital RF channel
❖
When an HDMI
❖
This feature is automatically set to Off when Dynamic Volume (Audyssey
®
Dynamic Volume ) is set to Day or Night.
This feature will also affect Digital Audio Output when the optical audio
output format is set to PCM.
®
—provides clear, accurate and natural sound right
Picture and Sound Controls
Adjusting the audio
®
Digital and Dolby
®
Digital or Dolby
®
input is used
105
®
Digital Plus
®
Digital Plus is input