Selecting the analog audio output format
Set the type of analog audio that is output from the ANALOG AUDIO
OUT terminal.
1
Press the MENU button.
2
Select Sound > Analog Audio Output and press the OK button.
3
Press the p / q (arrow) buttons to select Fixed or Variable.
Fixed:
Variable:
4
Press the EXIT button.
Digital Audio Selection
You can switch to DTV broadcast digital audio.
1
Press the MENU button.
2
Select Sound > Digital Audio Selection and press the OK button.
3
Press the t / u (arrow) buttons to select your preferred language.
4
Press the EXIT button.
NOTE
Using the Dolby
You can further compress Dolby
dynamic range so you can switch from digital to analog broadcasts at the
same dynamic range.
1
Press the MENU button.
2
Select Sound > Dynamic Range Control and press the OK button.
3
Press the p / q (arrow) buttons to select On.
NOTE
Audio is output at a constant volume level.
The volume level can be adjusted on the TV.
This operation cannot be performed when receiving ATV broadcasts or
watching externally input video.
®
Digital Dynamic Range Control feature
This feature is available when Dolby
to the TV in the following situations:
When tuned to a digital RF channel
❖
When an HDMI
❖
When network devices are used
❖
This feature will also affect Digital Audio Output when the optical audio
output format is set to PCM.
Picture and Sound Controls
Adjusting the audio
®
Digital and Dolby
®
Digital or Dolby
®
input is used
113
®
Digital Plus
®
Digital Plus is input