Connecting A Digital Audio System - Toshiba 32L4300UC User Manual

Connecting a digital audio system

The TV's Digital Audio Out terminal outputs a Dolby
2-channel down-mixed PCM (pulse-code modulation) signal for using
with an external Dolby
with optical audio input.
You will need an Optical audio cable (Use an optical audio cable that
has the larger "TosLink" connector and not the smaller "mini-optical"
connector.)
TV back panel
(Sample Illustration) L7300UC Series—Connecting a digital audio
system
Before controlling the audio, see
format" on page
NOTE
Connecting a digital audio system
®
Digital decoder or other external audio systems
HDMI IN
DIGITAL AUDIO
OUT
104.
Some audio systems may not be compatible with Dolby Digital bitstream
signals. Older audio systems that are not compatible with standard optical
out signals may not work properly, creating a high noise level that may
damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY
YOUR WARRANTY. The DIGITAL AUDIO OUT terminal may not output some
digital audio sources because of copy restrictions.
The Dolby Digital format is available in the following situations:
❖
- When tuned to a digital RF channel
- When an HDMI input is used
- When network devices are used
Connecting Your TV
Digital audio system
Optical audio cable
"Selecting the optical audio output
35
®
Digital or
LINE IN Optical
L R Audio IN