Channel Tuning - Toshiba 32L4300UC User Manual

2 Select Media Renderer, and select On or Off from the sub
menu.
When On is selected, the Media Renderer function can be
used.
3 Select Next.
6

Channel Tuning

Select Antenna or Cable, and select Start Scan.
Auto Tuning will start.
While scanning is in progress, the Auto Tuning Progress screen
appears.
NOTE
If you do not want to scan channels, you do not need to make a selection
for Channel Tuning. Select Skip to skip this step.
NOTE
If you want to stop scanning, pressing the EXIT button while scanning is in
process.
While scanning is in progress, the Auto Tuning Progress screen
appears.
After scanning is complete, the auto tuning results screen (such as
the one below) will appear.
Auto Tuning (Antenna)
Ch.
101 - 201
201
101 - 201
201
101 - 201
201
101 - 201
201
(Sample Illustration) Auto Tuning Results screen
Press the OK button.
NOTE
The encrypted channels are not listed on the auto tuning result screen.
Initial Setup and Menu
Performing the initial setup
Antenna Channels Found: 13
Type
ATV
DTV
ATV
DTV
ATV
DTV
ATV
RF Ch.
0
11
22
33
44
55
66
77
57