Table of Contents
Advertisement
108
Picture and Sound Controls
Adjusting the audio
Using the Dolby
You can further compress Dolby
dynamic range so you can switch from digital to analog broadcasts at the
same dynamic range.
1
Press the SETUP button.
2
Select Sound > Dynamic Range Control and press the OK button.
3
Press the p / q (arrow) buttons to select On.
NOTE
Audyssey Premium Television™
These televisions use a suite of technologies for better sound including:
Audyssey EQ
❖
out of the box. This technology ensures you enjoy your audio
experience as much as your video.
Audyssey ABX™—technology uses sophisticated driver analysis
❖
and low frequency monitoring to extend the range and bass of small
speakers. This enables the system to produce lower frequencies than
would be possible with a traditional system of the same size.
Audyssey Dynamic Volume
❖
Depending on the equipment, noise etc. may occur when the signal is
changed.
Depending on the connected equipment (amplifier, etc.), adjustment
❖
may not be possible.
When the optical audio output setting (Auto t PCM) is changed, it
❖
may be necessary to adjust the timing again.
Do not use other than for audio output from the AV amplifier, etc.
❖
(Malfunction may occur)
®
Digital Dynamic Range Control feature
This feature is available when Dolby
to the TV in the following situations:
When tuned to a digital RF channel
❖
When an HDMI
❖
This feature is automatically set to Off when Dynamic Volume (Audyssey
®
Dynamic Volume
) is set to Day or Night.
This feature will also affect Digital Audio Output when the optical audio
output format is set to PCM.
®
—provides clear, accurate and natural sound right
®
Digital and Dolby
®
Digital or Dolby
™
input is used
®
—automatically adjusts volume to
®
Digital Plus
®
Digital Plus is input
Hide quick links:
Advertisement
Table of Contents
