Table of Contents
Advertisement
2.
Check the current settings on the menu.
3.
Change the menu settings as necessary for your
application. Refer to the following sections for detailed
descriptions of the menu items.
4.
If you decide not to make any changes after checking the
current settings, close the Set Up Menu and return to a
normal camera picture by moving the cursor (
and pressing SET.
Note
If no button is pressed for 30 seconds while the
OSD menu or any other setting menu is
displayed, the menu is automatically closed
and the monitor returns to showing the normal
camera picture.
Reset
Reset allows you to reset all Set Up Menu items to the factory
default settings if you are unsure about the correct settings.
Reset as follows:
1.
Move the cursor (
2.
The message Resetting... momentarily appears on the
monitor.
3.
All adjustments and parameters are now reset to the
factory default settings.
Rev 1.01
) to Reset and press SET.
10
) to EXIT
900.0355
01/06
Advertisement
Table of Contents
