Honeywell Lyric C1 Quick Installation Manual
Wi-fi security camera
Hide thumbs
Also See for Lyric C1:
- User manual (32 pages) ,
- Installation manual (37 pages) ,
- Quick installation manual (37 pages)
Table of Contents
Advertisement
Quick Links
Lyric™ C1 Wi-Fi
Security Camera
Quick Installation Guide
Download the Honeywell Lyric app
NOTE: Have your Wi-Fi password available and confirm your
router communicates at 2.4 GHz before installation.
1
Make sure bluetooth is enabled on your mobile device.
2
Search for Honeywell Lyric in the App Store
or Google Play.
3
Download the Honeywell Lyric app.
Home
GET IT ON
Lyric
Advertisement
Table of Contents
Related Manuals for Honeywell Lyric C1
Summary of Contents for Honeywell Lyric C1
-
Page 1: Quick Installation Guide
NOTE: Have your Wi-Fi password available and confirm your router communicates at 2.4 GHz before installation. Make sure bluetooth is enabled on your mobile device. Search for Honeywell Lyric in the App Store or Google Play. Download the Honeywell Lyric app. -
Page 2: Installation
Launch the Lyric app Launch the Lyric app. Carrier 8:08 AM 100% Add New Device Select the Lyric C1 Wi-Fi Camera to Select a device to installl install, then create an account (if necessary), or sign in to your Lyric Lyric Round account. -
Page 3: Connect To Mobile Device
Connect Connect to mobile device Enable bluetooth on your mobile device. Carrier 8:08 AM 100% Connect Connect The app will look for the camera. Scan code to connect camera • For one camera, it will connect automatically. • For more than one camera, the app will prompt you to select one camera at a Looking for Camera time. -
Page 4: With Stand
Wi-Fi connection LEDs During Wi-Fi connection, the LED indicates the following. Camera state Blinking Green Connecting to Wi-Fi network. Solid Green Connected to Wi-Fi network. Solid Red (for 2 Connection failed. LED will then turn solid purple. seconds) Solid Purple QR Code scan complete. -
Page 5: Operation
Operation Remove/replace the stand The stand is connected to the camera by a magnet. If you want to remove the stand to hang the camera on the wall or replace the SD card, simply pull the stand off of the camera. To replace, just snap it back on the camera. -
Page 6: Camera Overview
Camera overview Camera lens LED indication Power cable Stand Reset hole SD card and slot Reset If your Wi-Fi connection fails or you need to connect to a different Wi-Fi network, insert one end of a paperclip into the reset hole. Press and hold it for 5 seconds to reset the Wi-Fi connection. -
Page 7: Status Led
Status LED The camera has an LED that gives device status. Camera state During installation Blinking Blue Powered up. Ready to begin setup. Solid Blue Connected to App. Ready to complete setup. Solid Purple QR Code scan complete. Re-start Connect to Wi-Fi process. -
Page 8: Fcc Regulations
FCC Regulations § 15.19 (a)(3) This device complies with part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 9: Need Help
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Need help? • Web: yourhome.honeywell.com • Email: MyLyric@honeywell.com • Phone: 1-800-633-3991... - Page 12 Home Home and Building Technologies Honeywell 1985 Douglas Drive North Golden Valley, MN 55422-3992 yourhome.honeywell.com ® U.S. Registered Trademark. © 2017 Honeywell International Inc. 33-00261EFS—01 M.S. 03-17 33-00261EFS-01 Printed in U.S.A.