Table of Contents
Advertisement
8
Troubleshooting
Frequently Asked Questions (FAQ)
1. The image is blurred, how can I get the best
quality picture?
Please read chapters 6 and 7 of this manual for information
about selecting the correct type of video signal and adjusting
the monitor for best performance. For computer graphics, set
the computer's graphics adaptor to display a resolution of 1600
pixels x 1200 pixels. Lower resolution signals can be displayed
by the monitor, but the displayed image will not be optimal if the
monitor's scaling setting is set to Fill the screen.
Are you using a VGA or video extension cable?
Blurring and other types of distortion can be caused by
conduction losses or impedence mismatches in extension
cables. Test whether the extension cable is the source of the
problem by removing it and connecting the monitor directly to
the computer or other signal source.
Is the image correct? If not, and you are viewing a computer
graphics signal, optimize the image as described in chapter 7.
You can usually minimise these losses and improve the quality
of the displayed image by using an extension cable with better
conduction properties.
2. Why does the image look yellow, blue or pink
instead of showing the correct colours?
The most common cause of this problem is a loose signal
cable or connector. Check that the cable is securely connected
to the computer or video source.
Check the signal cable for damage. If any pins are bent or
broken off, the cable will need to be replaced.
28
Advertisement
Table of Contents
