Supported Graphics Modes And Refresh Rates - Diamond View DV200B User Manual

If you are using an Apple Macintosh, you may change the
resolution by:
1. Clicking the Apple icon at the top, left corner of the screen.
2. Select Control Panel and then select Monitors & Sound.
4. Select a resolution of 1600x1200 pixels with 60 Hz refresh
rate.
5. If a refresh rate of 60 Hz is not available, click
Recommended in the Show drop-down box and change it
to All. Select the resolution and refresh rate as above. A
color depth of Millions is recommended.

Supported Graphics Modes and Refresh Rates

There is no need to choose the highest possible refresh rate
when using an LCD monitor. It is not technically possible for an
LCD monitor to flicker. Even at a refresh rate of 60 Hz you will
get a flicker-free image.
For best results, it is important that you set the graphics adap-
tor to use one of the monitor's preset display modes shown in
Table 1 on the next page. Other graphics signals may be dis-
played poorly or not at all. Note that the DV200B's preset
modes correspond to VESA standard graphics signals for
these resolutions. All recent models of graphics adaptor should
be able to support these modes. For the native resolution of
1600x1200 pixels, for example, refresh rates of 60 Hertz is
supported.
With Windows 95, 98, 2000, Millennium Edition or XP you can
change the refresh rate of the graphics signal as follows:
1. Double click the Display icon in the control panel.
2. From the Display Properties dialogue, select the Settings
17