Copy And Delete Text; Messaging - Nokia 6700 User Giude

If you are writing text using a non-
Latin alphabet and want to write Latin
characters, for example e-mail or web
addresses, you may need to change the
writing language. To change the
writing language, select
Input options
>
and a writing language that uses Latin
characters.

Copy and delete text

1 To select letters and words, press
and hold #, and at the same time
scroll left or right. To select lines of
text, press and hold #, and at the
same time scroll up or down.
2 To copy the text, press and hold
#, and at the same time select
Copy.
To delete the selected text, press
the clear key C.
3 To paste the text, scroll to the
desired location, press and hold
#, and at the same time select
Paste.
www.nokia.com/support
Options
>
Writing language,

Messaging

Select > Messaging.
In Messaging (network service), you
can send and receive text, multimedia,
audio, and e-mail messages. You can
also receive web service messages, cell
broadcast messages, and special
messages containing data, and send
service commands.
The available messaging types may
vary. For more information, contact
your service provider.
Before sending or receiving messages,
you may need to do the following:
Insert a valid SIM card in the device
•
and be located in the service area
of a cellular network.
Verify that the network supports
•
the messaging features you want
to use and that they are activated
on your SIM card.
Define the internet access point
•
settings on the device.
Define the e-mail account settings
•
on the device.
Define the text message settings
•
on the device.
Define the multimedia message
•
settings on the device.
The device may recognise the SIM card
provider and automatically configure
some of the message settings. If not,
you may need to define the settings
manually; or contact your service
provider to configure the settings.
©
2010 Nokia. All rights reserved.
Messaging 29