Copy And Delete Text - Nokia RM-409 User Manual

RM-409_FCC_draft_en_1.fm Page 32 Friday, May 2, 2008 10:25 AM
To change the writing language of your device, select
sett. > General > Personalisation > Language > Writing language. The writing
language affects the characters available when writing text and the predictive
text dictionary used. Not all characters available under a number key are printed
on the key.
Write with traditional text input
Press a number key, 2 to 9, repeatedly until the desired character appears. Press
the 1 key for the most common punctuation marks and special characters.
If the next letter you want is on the same key as the present one, wait until the
cursor appears (or scroll forward to end the time-out period), and enter the letter.
Write with predictive text input
1. Press a number key, 2–9, only once for one letter. The word changes after every
keypress. For the most common punctuation marks, press 1.
2. When you have finished the word and it is correct, to confirm it, scroll forward
or insert a space.
If the word is not correct, to view the matching words the dictionary has found
one by one, press * repeatedly.
If the ? character is shown after the word, the word you intended to write is
not in the dictionary. To add a word to the dictionary, select Spell. Enter the
word (up to 32 letters), and select OK. The word is added to the dictionary.
When the dictionary becomes full, a new word replaces the oldest added word.
Common functions in traditional and predictive text input
To insert a number, press and hold the number key.
To enter punctuation marks and special characters, press and hold *.
To erase a character, press the clear key. To erase more characters, press and hold
the clear key.
To insert a space, press 0. To move the cursor to the next line, press 0 three times.

■ Copy and delete text

1. To select letters and words, press and hold #, and at the same time scroll left or
right. To select lines of text, press and hold #, and at the same time scroll up or
down.
2. To copy the text, press and hold #, and at the same time select Copy.
To delete the selected text, press the clear key.
32
> Settings > Phone
W r i t e t e x t