Charge The Battery - Nokia 6700 User Giude

Hide thumbs Also See for 6700:
Table of Contents

Advertisement

2
Place the card in the slot with the
contact area facing down (1), and
push the card gently to lock it into
place (2).
3
Replace the back cover.

Charge the battery

Your battery has been partially
charged at the factory. If the device
indicates a low charge, do the
following:
1
Connect the charger to a wall
outlet.
2
Connect the charger to the device.
3
When the battery is fully charged,
disconnect the charger from the
device, then from the wall outlet.
You do not need to charge the battery
for a specific length of time, and you
can use the device while it is charging.
If the battery is completely discharged,
it may take several minutes before the
charging indicator appears on the
display or before any calls can be
made.
www.nokia.com/support
Tip: If you have old compatible Nokia
chargers, you can use them with your
device by attaching the CA-44 charger
adapter to the old charger. The
adapter is available as a separate
accessory.
USB charging
You can use USB charging when a wall
outlet is not available. When charging
your device with the USB data cable,
the charging time is longer. USB
charging efficiency varies significantly.
In some cases, it may take a very long
time for charging to start and the
device to start functioning.
With USB charging, you can also
transfer data with the USB data cable
while charging the device.
1
Connect a compatible USB device
to your device using a compatible
USB data cable.
Depending on the type of the
device that is used for charging, it
may take a while for charging to
start.
2
If the device is switched on, select
from the available USB mode
options on the display of the
device.
©
2010 Nokia. All rights reserved.
Get started
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

6700 slide

Table of Contents