Table of Contents
Advertisement
Press the Power key to turn the P-touch on.
Press the Power key again to turn the P-touch off.
• Your P-touch has a power saving feature which automatically turns itself off (under certain operating conditions)
if no key is pressed for a period of time. Refer to the Auto Power-Off Time table below for details.
• If the batteries are installed (or the P-touch is connected to an electrical outlet with the AC adapter), the previous
session's information is displayed when the power is turned on.
With AC adapter
With battery
Feed function
The Feed function will feed 25 mm of blank tape.
• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to be discharged
with the tape.
• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape to jam.
1
Press the Shift key and then press the Print key.
2
The message "Feeding Tape... Please Wait" appears while the tape is fed.
LCD Contrast
You can change the contrast setting of the LCD display to one of five levels (+2, +1, 0, -1, -2)
to make the screen easier to read. The default setting is "0".
1
Press the Menu key to display the setup menu, select "Adjustment" using the
key, and then press the OK or Enter key.
2
Select "LCD Contrast" using the
3
Press the OK or Enter key.
• Press the Escape key to return to the previous step.
• Pressing the Space key on the contrast setting screen sets the contrast to the default value "0".
Turning Power On/Off
Auto Power-Off Time
Feeding Tape
LCD Display
or
key and set the value using the
5 minutes
5 minutes
or
or
key.
23
Turning Power On/Off
1
2
3
4
5
6
7
8
9
Hide quick links:
Advertisement
Table of Contents
