Table of Contents
Advertisement
GETTING STARTED
Backlight
You can change the backlight setting either to ON or OFF.
The display is easier to see with the backlight ON. The default setting is "ON".
1
Press the Menu key to display the Setup menu, select "Backlight" using the
key, and then press the OK or Enter key.
2
Select "ON" or "OFF" using the
3
Press the OK or Enter key.
• Power can be saved when the backlight is turned off.
• The backlight will automatically turn off after 10 seconds of inactivity, press any key to re-enable it. During
printing, the backlight is disabled.
Language
1
Press the Menu key to display the Setup menu, select "Language" using the
key, and then press the OK or Enter key.
2
Select a language for menu commands and messages shown on the LCD display by
using the
The language can be selected from "Čeština", "Dansk", "Deutsch", "English",
"Español", "Français", "Hrvatski", "Italiano", "Magyar", "Nederlands", "Norsk", "Polski",
"Português", "Português (Brasil)", "Română", "Slovenski", "Slovenský", "Suomi",
"Svenska" or "Türkçe".
3
Press the OK or Enter key.
Press the Escape key to return to the previous step.
Unit
1
Press the Menu key to display the Setup menu, select "Unit" using the
and then press the OK or Enter key.
2
Select a unit for dimensions shown on the LCD display by using the
Either "mm" or "inch" can be selected.
3
Press the OK or Enter key.
The default setting is "mm".
Press the Escape key to return to the previous step.
24
Setting Language and Unit
Setting Language and Unit
or
key.
or
key.
or
or
or
key,
or
key.
Hide quick links:
Advertisement
Table of Contents
