Ac Adapter Ad-E001 (Optional) - Brother P-touch H300 User Manual

AC Adapter AD-E001 (Optional)

Use AD-E001 (AC adapter) for this machine. AD-18 or AD-24ES cannot be used.
Connect the AC adapter directly to the P-touch.
1
Insert the plug on the AC adapter cord into the connector marked DC IN 12 V on the
P-touch.
2
Insert the AC adapter plug into a standard electrical outlet.
• Turn the P-touch off before disconnecting the AC adapter.
• Do not pull or bend the AC adapter cord.
To safeguard and backup the memory, when the AC adapter is unplugged it is recommended to have AA-
size alkaline batteries (LR06) or Ni-MH rechargeable batteries (HR06) installed in the machine.
• Only use the official AC adapter, which is designed for your P-touch. Failure to observe this
may result in an accident or damage. Brother shall not assume any responsibility for any
accident or damage resulting from not using the specified AC adapter.
• Do not connect the AC adapter to a non-standard electrical outlet. Failure to observe this may
result in an accident or damage. Brother shall not assume any responsibility for any accident
or damage resulting from not using a standard electrical outlet.
• Disconnect the AC adapter from the P-touch and electrical outlet when you do not intend to
use the P-touch for an extended period.
• When power is disconnected for more than two minutes, all text and format settings will be
cleared. Any text files stored in the memory will also be cleared.
WARNING
CAUTION
1
2
3
4
5
6
7
8
9
19
Power Supply