Table of Contents
Advertisement
7. BEFORE YOU START
7.1
Finding a Viewing Video Source Input on Your TV
After you have completed all of the connections to your TV, review the steps below.
1. Press [STANDBY/ON .] to Turn On the unit.
2. Turn On your TV.
3. Please locate the Source / Input / AUX / Video button on TV's remote control. The button may vary on the
TV brand and model. Once you have located the button, press until you see "Please Wait... " or the Initial Setup
Menu on the Screen.
Please Wait...
This is the correct viewing of the video Source Input.
• If the TV is connected by an HDMI cable, it may take a few moments for the opening picture to appear.
• If a certain amount of time has passed since you turned on the unit, welcome screen only appears the first
time you Turn On the unit.
7.2
Initial Setup
Please follow the instructions below to complete the initial setup.
1. While welcome screen is displayed, use [Î / ï] to select "Next", then press [OK].
2. Language setup screen will appear. Use [Î / ï] to select your language, then press [OK].
Language
Please select your language for on-screen
display.
English
Español
Français
Back
3. "Quick Start Mode" screen will appear. Use [Î / ï] to select the desired mode, then press [OK].
■ How to Reset the OSD Language
You can reset the OSD language if you selected the wrong language.
1. Press [HOME] to display the Home Menu.
2. Use [Í / Æ] to select "
• This item is "Settings" (English) / "Configuaraciones" (Spanish) / "Paramètres" (French).
• From here on, please select one of the following items you can find on screen.
3. Use [Î / ï] to select "Playback" (English) / "Reproducción" (Spanish) / "Lecture" (French), then press [OK].
4. Use [Î / ï] to select "Language" (English) / "Idioma" (Spanish) / "Langue" (French), then press [OK].
5. Use [Î / ï] to select your desired language, then press [OK].
6. If the items that were set are displayed in your desired language, then press [HOME] to Exit.
", then press [OK].
EN-15
Advertisement
Table of Contents
