Magnavox MBP1200 Setup Manual

SETUP MANUAL
See the Online Owner's Manual for details:
www.MAGNAVOX.com
Step 1 Please visit website www.MAGNAVOX.com
Step 2 Select Download.
Step 3 Type in the Model # "MBP1200" and click "Search".
Step 4 Select the Manual, and click on "Download".
© 2011 Funai Electric Co., Ltd.
Printed in China
E5U90UD
1VMN32273 ★★★★★
* 1 V M N 3 2 2 7 3 *
SP P E E ECIFICATIONS C C IFI I C C A A T T IO O N N S
General
NTSC Color
Signal system
120 V AC, 60 Hz
Power requirements
Power consumption 14 W (standby: 0.7 W)
Dimensions 11.1 x 2.2 x 8.3 inches
(width x height x depth) (280 x 54.5 x 210.5 mm)
Weight 2.43 lbs. (1.1 kg)
Operating temperature 41°F (5°C) to 104°F (40°C)
Operating humidity Less than 80 % (no condensation)
Connection Specifics
USB input (USB 2.0) Bus power current: MAX. 500 mA
Audio output (Analog) L/R: 2 Vrms
(RCA jack x 2) (output impedance: more than 1kΩ)
Video output (RCA jack x 1) 1 Vp-p (75Ω)
HDMI output (HDMI jack x 1) Digital video: 480p, 720p, 1080i, 1080p,
1080p24 / Digital audio
D Note
• The specifications and design of this product are subject to change
without notice.
S S U U P P P PLIED ACCESSORIES P LIE E D D A A C C C C ES S S S O O R R IE E S S
Remote Control (NB959UD)
Batteries (AAA, 1.5V x 2)
Audio / video cables
SETUP MANUAL
MAGNAVOX is a registered trademark of Philips Electronics North America
Corporation and is used by Funai Electric Co. Ltd. and Funai Corporation, Inc. under
license from Philips Electronics North America.
For product recycling information, please visit - www.magnavox.com
Click on
1
C C O O N NNECTIONS N NEC C T T I I O O N S N

Connection to the TV

HDMI Out
HDMI cable (not supplied)
AUDIO
OUT
VIDEO
HDMI OUT L
OUT
R
MBP1200 or
Video & Audio Out
Video cable (supplied)
AUDIO
OUT
VIDEO
HDMI OUT L
OUT
R
R R EMO O OTE CONTROL T E T CON N T T
(*) The unit can also be Turned On by
pressing these buttons.
1. STANDBY/ON . button
1 13*
Press to Turn On the unit, or to switch
2
the unit into STANDBY mode. (To
completely Turn Off the unit, you must
3 14
unplug the AC power cord.)
2. RED / GREEN / BLUE / YELLOW
buttons
4
15
Press to activate shortcut keys on
some BD-video functions.
When file list is shown, press to switch
5 16
between pages.
6
17
3. TOP MENU button
7*
Blu-ray Disc™: Press to display the
8 18
Top Menu.
9 19
20 DVD: Press to display the Title Menu.
4. Î / ï / Í / Æ buttons
21
10
Press to select items or settings.
22
5. HOME button
11
23
Press to display the home menu.
12 24
6. ¢ (REVERSE) button
During playback, press to Fast Reverse
25
the playback.
7. Æ (PLAY) button*
Press to start playback or Resume
playback.
INSERT BATTERIES
8. H (SKIP) button
During playback, press once to return
Install 2 AAA (1.5V) batteries
to the beginning of the current title,
chapter, track or file.
During playback, press twice to return to
the previous title, chapter, track or file.
During the JPEG playback, press to
return to the previous file.
9. Ê (STOP) button
Press to Stop playback.
10. NUMBER buttons
Press to select a chapter during playback.
Press to enter Numbers in the input field.
2
I I N N IT T ITIAL SETUP I I A A L
Power Button
Please Wait... Please Wait...
STANDBY/ON
Language
Please select your language for on-screen
display.
English
Español
Français
Back
Audio cable
(supplied)
R R OL L
11. SEARCH button
Press to display the Search Menu.
12. REPEAT button
Press to select Repeat mode.
13. OPEN/CLOSE fl button*
Press to Open or Close the disc tray.
14. POP MENU/MENU button
Blu-ray Disc™: Press to display the Pop Menu.
DVD: Press to display the Disc Menu.
15. OK button
Press to confirm or select menu items.
16. RETURN button
Press to Return to the previously displayed menu or screen function.
17. ∫ (FORWARD) button
During playback, press to Fast Forward the playback.
When playback is in pause, press to Slow Forward the playback.
18. G (SKIP) button
During playback, press to Skip to the next chapter, track or file.
When playback is in pause mode, press to Forward the playback picture
by picture.
19. Δ (PAUSE) button
Press to Pause playback.
20. DISPLAY button
Press to display the on-screen Display Menu.
21. ANGLE button
Press to access various camera Angles on the disc.
Press to rotate the JPEG files clockwise by 90 degrees.
22. SUBTITLE button
Press to select Subtitles on a disc.
23. AUDIO button
Press to select the Audio channel (such as Audio languages) on a disc.
24. MODE button
During playback, press to display the Play Menu.
25. CLEAR button
Press to Clear the information once entered.
D Note
• The Power-On indicator on the front panel dims and flickers when it receives
the IR signal from the remote control.
• Use the supplied remote control. Remote-control operation on any other
remote control, such as an universal remote control, is not guaranteed.
SET T U U P P T T
No power.
Please locate the input/video button
on TV's remote control. The button
may vary on the brand and model of
the TV. Once you have located the
No sound or picture.
button, press until you see the Initial
Setup menu on the screen.
AV/SOURCE
Initialization I i i li Initialization i
Welcome!
This unit is ready for initialization. Please
follow the on-screen instructions. No reaction to the
remote control.
Next
Cancel
No audio / video on
en
the display device using
HDMI cable.
Select your language.
No high-definition video
Quick Start Mode signal on the TV screen.
Would you like to activate the Quick Start Mode?
The unit will start up more quickly, but will consume
more power in standby mode.
On No audio signal from
Off
Surround system of the
Back audio system.
Distorted picture.
Completely distorted
picture or black / white
picture with
Blu-ray Disc™ / DVD.
No sound or distorted
sound.
Picture freezes
momentarily during
playback.
Cannot play back a disc. • Make sure that the product supports the disc.
If you have any questions or issues with our product, please refer to the
"TROUBLESHOOTING" section of this "SETUP MANUAL", or visit our website for the
Online Owner's Manual at
contact our Customer Service line at 1-800-605-8610.
S S
• Please refer to relevant topics on "TROUBLESHOOTING" in the Online
Owner's Manual before returning the product.
• If this unit becomes inoperative, do not try to correct the problem by
yourself. There are no user-serviceable parts inside. Eject the disc (if
possible), remove the USB Memory Stick, place the unit into the standby
mode, unplug the power plug, and please contact: 1-800-605-8610
or visit : www.magnavox.com/support
See the Online Owner's Manual for details:
R R O O OUBLESHOOTING U U B B L L ESH H O O O O T T ING
Problem Tip
• Check the power cord, if it is properly connected.
• Try another power outlet.
• Unplug the power cord, and wait for about 5-10 seconds.
Plug it back in and attempt to power on the unit.
• Make sure both the TV and Blu-ray Disc™ player are
Turned On.
• Confirm the connections to the TV are connected
properly as shown in the connection page in the Online
Owner's Manual.
• Check whether the connected TV or another device
supports HDCP. (This unit will not output a video
signal unless the other device supports HDCP.)
• Reduce the distance to infrared sensor window.
• Confirm that the player's power cord is plugged into a
powered outlet.
• Check the batteries and make sure they are inserted
properly by + or - symbols.
• Aim the remote at the unit's remote receiver. Then
press any arrow key and confirm the Power-On
indicator dims and blinks when a remote button is
pushed. Please check IR signal.
• If the unit is connected to a non certified HDMI device,
the audio / video signal will not Output to that device.
• Make sure the display device is on the correct Input /
video channel.
• Perform the HDMI hotplug: Disconnecting the HDMI
cable from the display device, Turn On both devices,
and replug the HDMI cable back in.
• Check with the TV manufacturer, if there are any
software updates available for the TV.
• Check if the HDMI cable is a certified version.
• Does the disc contain high-definition video? High-definition
video is not available when the disc does not contain it.
• Does the TV support high-definition video? High-definition
video is not available when the TV does not support it.
• Make sure the audio system is turned On.
• Check that Input mode on the audio system is on the
correct channel.
• Check if the Surround system is compatible with either
Bitstream or LPCM. If not sure please check the user
manual or contact the Surround manufacturer. Once
confirmed check the setting in the setup menu of the unit.
• Increase the volume level of the Surround system.
• Sometimes a small amount of picture distortion may
appear. This is not a malfunction.
• Connect this unit directly to the TV. If the audio /
video cables are connected to a VCR, pictures may be
distorted due to the VCR copyright protection system.
• Make sure the disc is compatible with this unit.
• Adjust the volume.
• Check if speakers are connected correctly.
• Check the HDMI connections.
• Make sure the HDMI cable is not plugged into the
HDMI-DVI TV connector which does not allow audio
to be received by the TV set.
• Check the settings in "Audio Out" menu.
• Is the disc a newer title? This problem may be solved by
software update.
• Check the disc for fingerprints / scratches and clean
with a soft cloth wiping from center to outer edge.
• Clean the disc.
• Check the region code of the disc. This unit supports
the following region codes.
- Blu-ray Disc™ : "A"
- DVD : "ALL" or "1"
• Clean the disc.
www.magnavox.com
. If additional support is required please
E E R R VICING V V IC C IN N G G
www.MAGNAVOX.com